|
| home > products > classic line |
 |
|
| Part
I - General |
| 1.01 |
Work
Included |
| |
A. |
Tempered
all glass entry doors and sidelites. |
| |
B. |
Glazing
channels and glazing materials. |
| |
C. |
Sealants
for butt glazed systems. |
| |
D. |
Metal
finishes for exposed metal and entry doors. |
| |
E. |
Hardware
for all glass entry door systems. |
| 1.02 |
Related
Work |
| |
Section
08800 Glass and Glazing |
| |
Section
08700 Door and Metal Hardware |
| 1.03 |
Quality
Assurance |
| |
A. |
Reference
specifications and standards. Comply with standards for glass and
metal basic materials as follows: |
| |
|
1. |
Tempered
Glass |
| |
|
|
a. |
Flat
Glass Marketing Association-FGMA Glazing Manual. |
| |
|
|
b. |
ANSI
Z97.1 American National Standards Institute (ANSI). |
| |
|
|
c. |
Consumer
Products Safety Commission (CPSC)-CPSC16CFR1201. |
| |
|
|
d. |
American
Society for Testing Materials (ASTM) - ASTM C1048-92 and ASTM 1036-91.
|
| |
|
2. |
Metals |
| |
|
|
a. |
National
Association of Architectural Metal Manufacturers (NAAMM). |
| |
|
3. |
Metal
Finishing |
| |
|
|
a. |
Architectural
Aluminum Manufacturers Association (AAMA) Section 605.2-85. |
| |
|
4. |
Hardware |
| |
|
|
a. |
Architectural
Hardware Association (AHA). |
| |
|
|
| |
B. |
Comply
with all standards noted above and in the event of a conflict, comply
with that portion of the specification that will result in the most
durable quality and most maintenance free application. |
| 1.04 |
Submittals |
| |
A. |
Prior
to fabrication of any materials, submit the following documents
in accordance with Section 01340 for owners approval. Do not fabricate
any materials until receipt of approved materials documents. |
| |
B. |
Shop
drawings: indicate component details, materials, finishes, dimensions,
fittings, location of hardware, and method of anchorage. |
| |
C. |
Product
data: manufacturer's literature, installation instructions and product
warranties. |
| |
D. |
Samples:
submit samples of glass for color and thickness and of door rail
in specified finish. |
| Part
II - Products and Systems |
| 2.01 |
General |
| |
A. |
Comply
with the requirements of the reference standards stated herein. |
| 2.02 |
Materials
and Accessories |
| |
A. |
Entry
doors |
| |
|
1. |
Approved
Manufacturer: Vitro America Products - Glass Door Division. |
| |
|
2. |
Glass:
1/2" clear tempered glass, horizontally tempered, tong marks
are unacceptable. Warpage shall be in compliance with ANSI Z97.1,
ASTM C1048-92 and ASTM 1036-91. |
| |
|
3. |
Rails
and Fittings: full length top and bottom rails shall be style 'T'
6063-T5 aluminum extrusion as shown on shop drawings. |
| |
|
4. |
Finish
for Rails and Fittings: #8 polished stainless steel clad. |
| |
B. |
Sidelites |
| |
|
1. |
Approved
Manufacturer: Vitro America Products - Glass Door Division. |
| |
|
2. |
Glass:
1/2" clear tempered glass to match door glass. |
| |
|
3. |
Rails
and Fittings: full length bottom rails only to match door rails. |
| |
|
4. |
Finish
for Rails and Fittings: to match finish on door rails. |
| Part
III - Execution |
| 3.01 |
General |
| |
A. |
Comply
with all referenced standards. |
| 3.02 |
General |
| |
A. |
Contractor
and sub-contractor are responsible for examining all areas and conditions
within which glass doors and sidelites are to be installed. Do not
proceed with any work until satisfactory conditions exist for proper
installation of all materials. |
| |
B. |
Install
all materials in accordance with approved shop drawings, samples
and manufacturer’s literature. |
|
|
|
|
|
